A combination of MS punches and Nesties.
Have a great day, {{HUGS}} from me to you:-)
Tuesday, 10 August 2010
Last Nights Effort!
A combination of MS punches and Nesties.
Have a great day, {{HUGS}} from me to you:-)
Monday, 9 August 2010
Friday, 6 August 2010
Gluten Free Help, Please!
I need to change my diet to gluten free. Does anyone have any advise about being gluten free, or any great muffin recipes?! If so could you please leave me a note in the comments bit at the bottom of here - many thanks:-)
{{HUGS}} from me to you:-)
PS, I do have some cards to post so please check back over the weekend!
{{HUGS}} from me to you:-)
PS, I do have some cards to post so please check back over the weekend!
Thursday, 5 August 2010
Can YOU Help Me Please?!
Can someone please help me?! I have a Spellbinder Wizard machine. Recently I bought a butterfly (LR0113) die & two poinsettia dies. The brand is Marianne Design Tiny Creatables. The two poinsettia dies cut out absolutely no problem at all.
However, no matter what I do, the butterfly die will not cut out:-( I contacted the place I bought it from & they swapped it for a new die, which they said cuts out great & sent me the die with some samples they had cut out. They are using a Cuttlebug Machine.
No matter what I do I cannot get the butterfly die to cut out, it cuts partially & leaves the center & other bits un-cut...can anyone help me?? Does anyone know why it won;t cut, or how I can get it to cut?? I have tried various plates etc but it still doesn't cut.
I was told the Wizard uses alot more pressure than the Cuttlebug (which is why I bought it) so it should be cutting it...right?!
PLEASE PLEASE PLEASE, IF YOU CAN OFFER ANY SOLUTION, PLEASE EMAIL ME...
westiegirl@kol.co.nz I would be REALLY REALLY grateful:-)
THANK YOU!!!!
However, no matter what I do, the butterfly die will not cut out:-( I contacted the place I bought it from & they swapped it for a new die, which they said cuts out great & sent me the die with some samples they had cut out. They are using a Cuttlebug Machine.
No matter what I do I cannot get the butterfly die to cut out, it cuts partially & leaves the center & other bits un-cut...can anyone help me?? Does anyone know why it won;t cut, or how I can get it to cut?? I have tried various plates etc but it still doesn't cut.
I was told the Wizard uses alot more pressure than the Cuttlebug (which is why I bought it) so it should be cutting it...right?!
PLEASE PLEASE PLEASE, IF YOU CAN OFFER ANY SOLUTION, PLEASE EMAIL ME...
westiegirl@kol.co.nz I would be REALLY REALLY grateful:-)
THANK YOU!!!!
Subscribe to:
Posts (Atom)